usb 3.0 common mode choke 0603 document 406-1 document 406-1 revised 07/20/10 common mode common mode impedance typ (ohms) attenuation typ (db) inductance 2 dcr max 3 isolation i rms 4 part number 1 100 mhz 500 mhz 1 ghz 100 mhz 500 mhz 1 ghz min (nh) (ohms) (vrms) (ma) 0603usb-251ml_ 25 44 64 1.31 3.16 8.45 18 0.077 250 500 0603usb-601ml_ 60 99 142 3.00 6.88 13.27 37 0.109 250 500 0603usb-951ml_ 95 156 234 4.62 9.75 16.06 63 0.142 250 500 0603usb-142ml_ 145 242 353 6.85 12.80 18.16 98 0.174 250 500 0603usb-222ml_ 225 384 592 9.14 16.53 20.29 150 0.209 250 500 1. when ordering, please specify packaging code: 0603usb-222ml c packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape (7500 parts per full reel). 2. inductance measured at 100 mhz using an agilent/hp 4286a imped - ance analyzer and a coilcraft smd-a fxture. 3. dcr is specifed per winding. 4. current per winding that causes a 20c rise from 25c ambient. 5. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. 0.042 1,07 0.004 0,10 0.030 0,76 0.003 0,076 0.010 0,25 0.023 0,58 0.034 0,86 0.030 0,73 0.013 0,33 0.012 0,30 0.010 0,25 0.004 0,10 recommended land p attern 0.060 0.003 1,52 0,076 1 1 2 2 4 4 3 3 3 4 2 1 designers kit c384 contains 10 of each value and all values of our 1206usb and 0805usb core material ferrite environmental rohs compliant, halogen free terminations gold over nickel over silver-palladium-glass frit ambient temperature C40c to +85c with i rms current, +85c to +105c with derated current storage temperature component: C40c to +105c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf ? designed for high-speed usb 3.0, hdmi, sata, ieee1394 and lvds applications; data rates up to 4.8 gbit/s. ? miniature eia 0603 footprint; only 1.07 mm tall ? most values provide >15 db common mode attenuation and >100 ohms impedance. dimensions are in inches mm weight 4.9 C 5.2 mg packaging 2000 per 7 reel; 7500 per 13 reel; plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2014 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
document 406-2 typical differential mode attenuation (ref: 50 ohms) typical impedance vs frequency typical common mode attenuation (ref: 50 ohms) atten uation (db ) 1 2 3 4 5 6 0 11 0 100 1000 10000 frequency (mhz ) atten uation (db ) 0 5 10 15 20 25 30 11 0 100 1000 10000 frequency (mhz ) 11 0 100 1000 10000 frequency (mhz ) 100 1000 10 1 0.1 impedance (ohms) -222 -142 -251 -951 -601 -222 -142 -251 -951 -601 -251 -601 -951 -142 -222 document 406-2 revised 07/20/10 us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2014 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation. usb 3.0 common mode choke 0603
|
